cmd hacking commands – You may have been using Windows for a long time so CMD will be very familiar to you. You can access the core features of windows using this cmd. Also this tool will be very helpful for you to fully handle windows.
The command line is useful, but hackers often use it for malicious purposes. Security professionals use the command line to identify potential security holes. So, if you are willing to become a hacker or security expert, this post might help you.
CMD hacking commands
In this post we will look at the most commonly used 8 CMD hacking commands. So, let’s check out the list of best CMD commands for Windows.
The meaning of ping is Packet Internet or Inter-Network Groper. This command sends certain packets of data to a specific web address using your Internet connection, which then sends these packets to your computer. The test shows the time taken to reach the specified address. The main use of ping command is test your target alive or not.
You first need to open your windows CMD and type ping in it and then just type any website or ip address you want to test and press the enter button to get your target result.
Nslookup is a network administration command-line tool. This will allow you to find the DNS record and IP address of a domain.
First type nslookup in your cmd and then type your target web address or ip address to know the full details of your target.
Its name can be specified as trace route.it allows users to find the IP’s way to reach a destination. The command calculates and displays the time it takes for each hop to reach a goal. You have to type
tracert x.x.x.x (if you know the IP Address) or else you can type tracert www.google.com (If you don’t know the IP address)
This command allows you to change the ARP cache. To succeed in a single subnet, you can run the arp-a command on each computer to see if the system has the correct MAC address.
This command lets users find out if they have Orb Poisoning on their LAN. You can try typing
arp-a in the command prompt.
This command will let you know all the information about your network. The information you can find out with this command is ipv6 address, Temporary ipv6 address, Subnet Mask, Default gateway, and all your network settings.
You can execute in the command prompt “ipconfig” or
If you want to find out who is establishing a connection with your computer, you might try typing in the command prompt “netstat -a”. It will display all the connections and get to know about the active connections and listening ports.
Type in command prompt
This command used to view and manipulate the IP routing tables in Microsoft Windows operating systems. This command will show you the routing table, metric and interface. You can type in the command prompt
8. Net View
This command displays the list of resources, computers, or domains shared by the specified computer. On Windows, you can use the Net View command to find computers in your network whose network discovery is turned on.
You can type in the command prompt
"net view x.x.x.x or computername"
I hope this post was very helpful to you and I want to share this post with your friends too. If you have any doubts about this post you can ask me by command.