Hack mic – Android and windows are the most widely used device by a large number of users. With the mic in it, we can talk to others, and if the mic is hacked by any hacker that hacker can hear everything we can talk near that device.
What we want to see in this post is about that, how to hack the mic in a device and how to protect ourselves from this hack.
There are many ways to hack a device mic, one of which is to inject malware into an application and install it on the target device so that we can control the target’s mic at any time. But to do this the target device must be near us.
But the tool we are going to look at in this post is a phishing tool, even if you use this tool to generate a link and send it to the target you will receive all the recorded 7 seconds of audio on your terminal as soon as that target clicks on the link you sent.
Hack mic with phishing method
The tool we are going to use for this is steal-audio, you can use this tool on both Termux and Linux devices and this tool is very simple to use.
First, you need to type the following command in your terminal to download this steal-audio tool on your device.
git clone https://github.com/swagkarna/steal-audio.git
After downloading the steal-audio tool, move your directory to the python_flask tool folder with the following command.
cd steal-audio
cd python_flask
Now run the python file stealer.py on your terminal, then run Ngrok on port 5000 and send the available link to your target.
After your target clicks on the link you sent, the target microphone will ask for permission and you can access the target audio only if your target allows it.
How to prevent your microphone from hackers?
You should not click on any unwanted link, you should not unknowingly click on the unwanted link, and the microphone that can ask that link should not allow camera access, only following this can protect your microphone from hackers.
I hope this post was very helpful to you and I want to share this post with your friends too. If you have any doubts about this post you can ask me through the command section below.
